Is there a way to use the 450mm axel varient of FANUC SR20iA in Roboguide, as it defaults to the 300mm axel varient when added?
Posts by Rhenius
-
-
Are you using the same USB stick on all these robots?
What is it storage capacity?
I had problems trying to perform backups on USB sticks in the past, and some rules of thumb:
1) NTFS formatted devices sometimes have problems.
2) the smaller is the capacity of the stick, the better it will work.
3) sometimes is good use the format device option on FILE screen. So, try to format the USB stick on controller itself
In the case of the RJ3 robot, I think it is showing the last valid accessed device, not Your device.
-
To view 4D DCS Display:
Menu => 0 (Next) => 6 (System) => 7 (DCS). Click Cart. position check: => Next => F3 (4D).
-
You can make continuous motion without braking and win time by using CONT. You can also try using LIN in the place of CIRC if possible and check the cycle time.