If you have a backup, try doing an initstart
Posts by fenix5114
-
-
" with a "real" email (not some generic webmail)."what does that mean?
With my personal email it doesn't leave me and my company has been waiting for the verification email for weeks.
Kuka told me that in a few days they could contact me with a technician .. -
I read "READ FIRST" first, I also sent the record on the kuka page weeks ago and nothing ... and I just need Spare Parts or Parts and Docs ... Thank you for your time.
-
does anyone have the digital cds that come with the kuka krc4 robots? I can't find them and in my robot it doesn't have them ..
thanks all
-
-
No recuerdo si de Roboguide se puede ver ..
-
Hi!
Does anyone know how I can locate the serial number of the wiring equipment they originally found from kuka?
Corrugated from axis 1 to 3 and from 3 to 6 with the Kuka K-Box.
Thank you
-
Hi everyone !!
I do not know if anyone around here knows or can pass me the robinstal I lost on my old PC and now I have no way to recover it.
It would be helpful, thank you very much in advance.
-
En el manual del movimiento seguro, el controlador será capaz de llegar, ya que se puede conectar a la parada superior si no recuerdo mal, mañana te podía pasar el pdf del cableado Baie IRC5 si lo necesita.
-
Supongo que se refiere a las cadenas de seguridad de la placa del operador, ¿verdad?
¿Qué cadena de seguridad no está presente, AS GS o SS?
-
A few months ago something similar happened to me, I had a 24V lead from the EE that fused the FS2 fuse. I recommend that you verify that you have no derivation by the 24v of the EE of the anti-collision of the wrist and replace the 6-axis servo amplifier
-
Hola a todos!
I have a doubt to see if you can help me.
I have a fanuc 2000iB robot with the R30IA controller. It comes with the European package and asks me what it does and how it can be bypass with the connectors in case of breakage.
thank you very much to all!!
-
As it says
nutcase511 if you enter the variable $ SCR_GRP. $ HBK_ENB and set it to 0 and also release the cable of the anti-collision making a cold starter you can use the robot but without anti-colsion.
-
In the file of installed options should come ...
-
has de cambiar consola de programación? -
HI.
I don't know very well what you want to do, but with a signal or variable that links you can do what you're saying. Inside the logic of the "if"
-
Cambiar la tarjeta SMB, otra opción es comprobar el cableado interno del robot, una vez que el cable ha sido falsificada, tengo que reemplazarlo. -
First of all thanks for the answers !.
¿What do I have to look for in e-bay for a Fanuc brake release unit?
I don't understand what he means or what I have to give a fanuc to ask for it.
I could not release the axle 14 brake with the variable:$PARAM_GROUP[1].$SV_OFF_ENB[1] ?
-
-
Hola a todos, buenos días.
Planeo crear una interconexión de señales para sacar al robot de la zona de trabajo en caso de crisis.
En primer lugar, me pregunto si hay una variable para desactivar el freno del motor de un eje solo para poder mover el robot con la mano (empujándolo)
Y en segundo lugar, si existe esa señal, planeo conectarla junto con la señal manual del robot y un detector para enviar al PLC y mover la parte una vez que el robot esté fuera, cuando lo movemos a mano en caso de crisis.
Todo está claro, excepto la señal de liberación del freno de un solo eje, por ejemplo, el eje 1.
Gracias.