Hi guys, so quick update.
I know have 3 BROM V.2.5 - another V.2.3 - another V.1.5.
I Clear the CMOS via pressing USER#1 and USER#2 on the controller (big metal box where you have the drive and all)
then i do INIT - Ok- then Start ...and it freeze there doesn't go to the reboot on the Teach Pendant.
At this point i think the issue is the connection cable between the Teach pendant and the PSU.
I know this that the other teach pendant and cable have different socket configuration. maybe one wire is not at the right place or something.
I can cut the wire and i ordered a Fanuc encoder plug HONDA from ebay fro 25$. but i would need to know where to solder the wire basically the configuration. i've search fanuc website for that data or book but could find anything .
any advice ?
I guess i could try to copy the HONDA plugin form that one that work and give it a try see if it works...maybe the wire color are the same ..