Posts by Rondon4545

So I've finally got my robot up and Running and all the programs loaded up but I cant seem to find the right home position that lines up with the programs I was wondering if its possible to find it from the position in the program

So I've been getting the crappy 9010 error with no arc from the get go I'm using a Miller robotic interface 2 with the motoman package but it's not going well

So I'm trying to figure out all of the things to teach it but every time I select MOVJ MOVL MOVS or any other things I get address not found any theorys

I got it figured out you override the alarm put it on hold and inch it away from any obstructions

Does anyone know what the shock sensor levels are supposed to be or how to clear the code

The servo will turn on in play but not teach the pendant says encoder batteries are low on RBT does this have anything to do with that

I have resolved it I had it wired wrong

What is the 24v power supply come from

Yes I have the manual as well I tried that but still can't get it

I got it resolved I had to reintialze and resutup the machine

I have checked all of the fuses on the whole machine it says dc 24v power supply failure any ideas

The number in the brackets is 1 I have already checked all the cables

I've been fighting with this machine all day does anyone have any in put for error 60 communication error 1