Posts by Robert Policiuc

Do you know if I can make a factory reset? I just bought the robot with the old programs in it.
KRC1 v2.3.24 SP07

Do you know why S and the R under the message bar disappeared.

All programs have the same error.

Before the error I accidentally pressed Save on Floppy and the message bar turn yellow for a while. Yes, there is a program named AD.

Hello. I use a krc1 and I have an error message. Maybe anyone know how to fix the problem or make a factory reset. Thanks.

How can you reboot the robot?

No. I bought the robot like this. It was functional.

Sent from my iPhone using Tapatalk

This error is for all axis.

Sent from my iPhone using Tapatalk

Hello! I have the error E0107 on teaching pendant. Does anyone know what the problem is? Thanks.

I've solved the Estop problem. I don’t know how to deal with “Drives contactor Off”. I found something in a kuka manual about Error message/ troubleshooting, but I don’t know how to solve this problem.

I want to jump the wires on X11 because I dont have another safety system. Is this jumper diagram right for cleaning the emergency message ?

The only estop is on teach pendant. I think the error is from it.

I have seen on other topic that to fix estop I have to make some connection on X11 under the cabinet. It is right?

Hello! I start my kuka for the first time and I have a eror message: “Active commands inhibited”. I am new to robotics and I dont know what to do. Maybe some of you know the problem. Thanks!

Hi!
It is possible to connect a krc2 pendant on a kcp1 cabinet? Thanks.

Sent from my iPhone using Tapatalk

Hello, I have a kuka kr15/2 with krc1 and I dont know where are the inputs for the gripper. Maybe somebody will help me. Thx.

Sent from my iPhone using Tapatalk