I got a problem for Fanuc and then I downloaded a picture of the program I have saved and then i masteing the robot than i had this problem plz help me ]
intp 206 digital port acces this is the message
أرسلت بواسطة iPhone بإستخدام Tapatalk
Posts by aaddooll
-
-
anyone knows good company in swiss make trining for robot fanuc programs
أرسلت بواسطة iPhone بإستخدام Tapatalk
-
Sorry to have to tell everyone this,
Fanuc have directly requested that all copyright material be removed from this forum.
I think there did not behave well. For example, I was looking for a training course for the robot program, but I did not even find it in fanucأرسلت بواسطة iPhone بإستخدام Tapatalk
-
so can anyone help me please
أرسلت بواسطة iPhone بإستخدام Tapatalk
-
no no
أرسلت بواسطة iPhone بإستخدام Tapatalk
-
Is your robot communicating with a PLC?If so, some rung (typical ladder logic) of logic in the PLC project has a condition causing the rung to be false.
The coil of that rung, when true, causes the robot’s HOLD signal to go on (this is desirable.)
The HOLD signal is UOP I/O input UI[2]Maybe some piece of equipment in the cell is out of position?
no the problem is the robot in hold and in siemens screen -i see in robot starts
robot in safety mode i don’t know whyأرسلت بواسطة iPhone بإستخدام Tapatalk
-
it’s rj3 working with another machine so i got
this alarm syst-034-hold-signal-from-sopuop is lost can anyone help me pleaseأرسلت بواسطة iPhone بإستخدام Tapatalk
Advertising from our partners
