Posts by elchico11

    Hello everyone,

    i'm using a robot fanuc after 7 year more or less and i need some advice to do the logic:

    Robot drop 4 identical parts (can be 74 or 62 mm large with 5mm gap between each) on a table.

    The costumer want manage the counter throught the plc (so i prepared a GI from plc where i receive the column and the raw).

    I need to measure a frame also for make it more precise?

    Thanks in advice!

    Hello, they just delivered this scara robot and i've no idea how to comunicate and program it. They told me this robot normally has no TP so i wonder which software and if there is some basic procedure for the first commissioning.