Thanks anyway!
Posts by BDDIAS
-
-
Hi Skooter,
Thank you for the diagram and the tip, I was really thinking of removing the cards
I finally found a technician that work with RJ2, i just talk to him by the phone but he really knows about this machine and help make a system copy.
He said the same as you having a good softwear backup is crutial. Like i said before i have one from other robot... hope that can be installed with no problems..
If i need can you get me a copy from a machine like mine?
Thanks Skooter you have being a great help!
-
You are working with robots for some time, Imagine there is alot of stories to tell. So a Simple thing to do is just take the daughter memory out and In again? I must get a diagram that can show me the right positivo of this boards só i don't make a big mistake.... The robot is working fine at the time (because i never Turn it off), but i had an error when i was running a cadcam program that is attatched In the pic. In the manual says its an internal error and that i should call FANUC suporte ir something. I just errased the program load another programs and never had that problem. Do you think it can BE related to the checksum situation?
-
álcool, thank you for the tip Herman!
Skooter i try several times backup all above and One by One but when i get to on of the files of the system its allways stops. If i have any problem with a memory can i get the sistem files from another controller? I don't know mutch about it but i Guess that i have to remaster the robot... and other more ir less Simple stuff... Hopefully
-
I try several times to make a backup all above but it stop at the Middle of the fith file.... I even try to make a backup of the controller softwear (with kfloppy) but it didnt complet the second file... I rely on a controller backup made Im a robô with similar característics...
Dosent look good but i'm going to manage something.
Mabe i cant make backups because a bad memory card.. or the connection between them..
-
Hi Skooter! After trying several times i got the controller to start. After that i didnt Turn the controller off. But Im preparing for the Worst.
Next time i have that problem i Will take some boards, cables and spray wd40 on the contacts.
Last time i made a control start.
I think the problem is a memory board the problem is to find the right One.
Im In contact with unisgroup there business is reparing old machines. Do you have any other advice?
-
Hi,
I have a 420iw with a rj2 controller.
When starting the controler stop In the beginning at checksum 3a9ab349.
When i shearch for this problema nothing appears of the manuals.
Does annyone know how to solve this or what could BE the problem?
Thank you
Bruno Dias
-
Hi Skooter
I was using windows 7, but a friend is trying to set a Windows XP to run some tests.
yes i selected floppy drive. There is thirth option in the UTIL menu, that i don't remember the name, when i choose it and make DIR and enter it show the content of another disc or memory with .SV files and some tp. Because it access this third memory like the kfloppy (presents the message - accessing device and in a second present the content of the third memory appears). I guess the hardware on the controller that make the connection is ok.
I made the test, the vdf must be far from the controller and pc.
I bought some ferrite bracelets to increase the shield of the cable. Got the idea from this video
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.i already bought terminals to redo the cable if is needed. Im not that great on welding cables..
https://www.ebay.com/itm/DB9-D…6f8ca31ffe294d7%7Ciid%3A1
https://www.ebay.com/itm/S6A3-…6f8ca31ffe294d7%7Ciid%3A1
Thank you
-
Hi Skooter , greetings from portugal,
Really appreciate your reply, do you have a similar robot and controller?
Yes i have a cable that is wired exactly as the diagram you sent, thank you.
I dont know if i was clear but i'm working with robot/pc connection on the last 6 month, without any problem.
The problem is that after start the emulation pc/robot, there is no activity registed on the kfloppy, and there is a timeout message on the teachpendant...
i don't know is the electric noise made by the vfd damage the port 1 of the controller... or if it was the com1 of the pc.
Tomorow im going to try another pc (with serial port), to test if it from the pc or not. i will be happy if the com1 as a problem and not the controller...
if that doesn't work i will recheck if the cable is fully function..
i will see how is the Options.bat file...
Question do you think electrical noise made by a vfd could damage something on the controller?
Thank you!
-
Hi,
I had my Fanuc 420i rj2 connected to the pc (using kfloppy), and it work fine... last week i saw that with a vfd(spindle) on there were interference (electric noise) and the connection brake. But when turning of the spindle of the connection between controller was fine... until this week.
Now the connection between pc and controller doesn't work any more, i try everything i could think of,
- I check the cabe with a multimeter to see if it was working, and it was ok,
- i try to configure and connect through port2 using the same rs-232, dint work,
- i reinstall the dosbox and kfloppy files, dint change...
Question don't know if the electric noise made by the vfd demadge something... is it possible?
Can anyone help me, i really need to put that robot to work and fast....
Thanks
Bruno
-
My friend is new to karel programming, and i don't know anything about programming. One of the things that scare me is that if the Karel program is not well written, it can damage the controller somehow.
I don't know if you have a lot of about experience of karel programming, but when is ready can i send you the program to check if its alright?Thanks!
-
Hi Nation,
I was seeing this post on my phone. Is very diferent when i use the pc, because i couldnt see the attachement.
Yes i donwload it.
Thank you alot!Do you think a karel program Can demage the controler?
-
Hi everione, What a great sucessuful story.
I have a 420iw with a rj2 4.30v. I'm trying to do a karel program (with a programer friend) to load big .tp files from the pc using doxbox.
And we dont have the compiler to...
This is a first so we dont really know how to test the program befor loading (i'm afraid the controler can be demadge somehow).
And i dont know how to Run the program when is on the controler..
Thank you on advance!