Ok...i want to try to have the program perfectly working,without alternatives we can say.
These are the KOPs file: ExpertTech, GripperSpotTech,KRC4 EthernetIP, UserTech
What kind of information do you need?
Ok...i want to try to have the program perfectly working,without alternatives we can say.
These are the KOPs file: ExpertTech, GripperSpotTech,KRC4 EthernetIP, UserTech
What kind of information do you need?
Hi there...I have a question about a problem I've encountered when I generate the code and then trying to download a program into the robot.
The messages are these:
09:33:21 Il tool "Fdt" ha rilevato un problema all'apertura del progetto attuale!
09:33:28 R1: XmlGeneration.NoConfigFilesAvailable
09:33:30 Errore sconosciuto nella creazione della configurazione dei dati macchina.
In english shuld be correct this form:
The "Fdt" tool has detected a problem when opening the current project!
R1: XmlGeneration.NoConfigFilesAvailable
Unknown error in creating the machine data configuration.
Now these are my spec. :
PC:
Windows 10, Processor: I7-6500 CPU 2.50 Ghz,RAM 8 GB.
Workvisual: KUKA.WorkVisual 4.0;WorkVisual_V4.0.26_Build0312
KUKA ROBOT: KRC4 V8.3.33
I have problem to download only in this way. When i try to download in View-->Programming and diagnosis, it works (cause i do not have to generate none code i think).
Anyone can help me?
Thanks for your time.
ok ok ok...sorry for wasting your time, but I tried to make a nonsense thing (at least for me) and nonsense worked.
I try to explain it if this happens to someone else.
First of all, I have the program in Italian so if the translations are not clear .. I apologize, I'm still available for explanations
In practice, I had programs open(uploaded on workvisual) in "View" -> "Programming and diagnosis" (image below) and for some reason they created errors (I do not know why). I found the folder that contained the data for these open projects (C: \ Users \ Notebook20 \ Documents \ WorkVisual Repositories) and I cut them from there, as if I had deleted them for the program. I tried to reopen the program and now it goes. Thank you Panic mode for your time. I appreciated it, and as we say here, Buona Giornata!
Sorry for the few informations, i'll try to asnwers to whole question.
* still unknown OS (Win95?)---* unknown resources: : Windows 10, Processor: I7-6500 CPU 2.50 Ghz,
RAM 8 GB.
* some program was run (very "specific"...) : workvisual was the only program in run
* unknown configuration (integrated KOP files and order in which they are added):
ExpertTech, GripperSpotTech,KRC4 EthernetIP, UserTech (i don't know the order because the program stop before i can do anything)
* what exactly changed? there was an uninstall... what exactly was uninstalled? :
nothing has changed from my usual use of the program. Just suddently crashed, so i tryed to rerun the program and the issue came up (continuos crashes at run). Then i tryed to unistall and install again workvisual but nothing changed.
* did you try rebooting PC?: i tryed,before and after unistall and install...several times
* did you try removing installed KOPs? : no, i don't know how to do it because i can't open the program properly...if there is a folder where delete them i don't know where is it.
i know this can't help but i want to specify one thing. the program worked well until last week, so i can "exclude" i think the possibility that the pc spec are not compatible.
Thank you again for your help panic mode (cool name btw).
Thank you for the answer panic mode. (i've read the READ FIRST, i think i should be in the right forum section)
I already used this version (and older version of workvisual too) for many months on this pc. The installation was complete and successful(i had none messagge of error after installation) , i have the required system and i'm admin. It happened suddently from morning to afternoon after a run of the program.
Is possible that after unistall, something is still in the hard drive and after a new Installation those things make me trouble?
INFO Workvisual: KUKA.WorkVisual 4.0;WorkVisual_V4.0.26_Build0312
Hi guys. i have a huge problem. When i start the Workvisual 4.0.26, the program show me a message that says:
System.Reflection.TargetInvocationException
----------------------------------------------------------------------------------------------------------------------
in System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
in System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
in System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
in System.Delegate.DynamicInvokeImpl(Object[] args)
in System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Boolean isSingleParameter)
in System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Boolean isSingleParameter, Delegate catchHandler)
every time i run the program this happens and it causes an instant crash. I tryed to reinstall the program and restart the pc... nothing works
What can i do?
Thanks to those who will help me