Posts by ORDEP81
-
-
How much video ram and graphics card you running?
-
Where can one get the info that is needed regarding the positioners?
-
Are you trying to move a program from on group to another say side A to a side B? if so a group exchange might be easier.
-
ya if had issues as well with anything other than iges. I just export all my 3d modes in iges format. Your 3d modeling software should have an exprort 3d option. Im using AutoCAD Inventor.
-
Im using roboguide and trying my hand at building a new cell based off one of our actual robots. I brought in the robot info from an all the above back up file. Problem is that there is no axis to the 2nd or 3rd groups. Im trying to add them but in the configuration screens I get asked questions about motor size, amp type, gear ratios, joints speeds, ect ect. These are older robots and Im not exactly sure as to where to get this info. Can anyone help where to begin on finding this out? Does it even matter that my virtual robot does not have correct positioner settings as long as they move in the same manner as the actual robot?
-
View > Program Details, check/uncheck what you want to display or not display
-
I could load iges and cad files no problem. What im wondering is I guess is how to actually build/assemble the cell at this point. Do I just go out and measure the height and distances of the robot base, positioners, cradle, work tables, etc etc? How accurate does all this have to be?
-
So i have an above all backup on my robot and imported it to the roboguide software. I have the robot w/ frames, programs and tcp loaded, but do not have the tooling, cradles, and positioners. I do have cad files for these, but not sure how to place them within the virtual cell. Can anyone give me some help with this or point me to a tutorial for this?
-
Just curious is there any plans to make a roboguide sub-forum? I would think this would come in handy to help filter out some of the threads and be able to find info specifically related to the software.