so noone can help me ?
Posts by Etke
-
-
Hi, i have read that already, but this package is for s7 1500 models
-
As i mentioned before, i have profinet , and i mapped at wov, i will attach another image of that..
My siemens plc and kuka krc4 has profinet connection made already, but i do not know how should ladder code look at tia portal side for plc...
-
Hello,
I have kuka robot KR8 and controler KRC4. Some time before support explained that we can use profinet protocol for input and output signals.
We bought siemens s7 1214 plc controler for that. I have managed to make connection between krc4 and siemens 1214 (when i reconnect cable to x66 port, controller makes message "connection between PLC and KRC4KR restored" KSS11014.
But however, i can not make input and output signal transfere via profinet.
I mapped io in workvisual (io - profinet). But i think i am writing a bad program in tia portal.
I tried using direct adresses, using "Put/Get" function blocks...
Maybe someone could help me, give me an example, or tell what function block i should use?
-
Hello,
i have the same problem as you did. This is my first time working with tia portal and work of visual
could you maybe share your projects?
I have Kuka KRC4 controler and siemens s7 1214 plc controler. I am trying to figure it out my self more than a week and have no progress at all