Posts by rawad

It is out off warred .

Exactly i mean the hour meter

there are three timers:
1- time of start up.
2- cal.time since last service.
3- duty time counter.
4- prod.time since last service.

I did as described in your subject but duty time counter in Flex Pendent didn't reset to zero.
do you have any idea to reset it.

Thank you dear

I mean software duty time counter which is appeares on flex pendent in SIS page.
Please help me it is urgent.

Dear Sirs

i have ABB robot IRB660 with IRC5 controller, i need to reset duty time counter, anyone can help me with required procedure.

Thank you all

Sorry For Disturb

any response?

Thanks panic mode
we use device net WAGO brand, and i try to set or rest outputs and flags like {output 5 which turn on the conveyor motor with in button in my own application (installed on Robots PC) and rest it form another button}, and so on.

Dear i am waiting your support

Hi dear

i had a damaged HDD on robot KRC2 180 and i have installed the required programs and program the robot from Zero with device net which connected, but there still a custom HMI, i have built the windows, but i don't know how to link the inputs, outputs, flags, counters to this windows .

here i need your help

thank you i will try and feedback you

dear sirs
i need to move the robot on z axis until sensor activated, how could i do it, please help me

Hi dear

I have Robot KR C2 180 2 PA with WAGO device net, i need to know how can i program the robot according to I/O of WAGO device net.

thanks a lot