Hello friends. I search for user manual of Yaskawa teach pendant JZRCR-NPP02-01 , wait for any help.
Thanks.
Hello friends. I search for user manual of Yaskawa teach pendant JZRCR-NPP02-01 , wait for any help.
Thanks.
Good. Maybe someone can invite me to buy used motor? Thanks.
Does anyone else have any idea how to do this?
Is screenshots from mecha.rom /CF/ CPU card
First, it's interesting, to understand the essence of the matter
No problem change it into S1 or B1, I need edit motor model S-axis of R1
Please look it:
Thank you David.
In to INITIALIZE screen aviable only list of .prm files, not as present on your screenshot
Motor model: SGMPH-04A2A-YR22
Encoder only, DP0304109.
All 1:1, model, version.
I need way to change the motor model to SGMPH-04A1A-YR22, as present
In the motoman manual (Please look the picture). After start the controller on Maintenans mode with yaskawa mode pass-d, not found any way to cange it
Hello everybody.
Who knows how to change the type of motor S-axis.
After encoder replacing get alarm 1307, ENCODER TYPE MISMATCH - encoder type (motor model) setting is incorrect, need set the installed motor type in the system configuration.
I found only where to change thу motor model and parameters of additional (B1 etc.) axis, and not found any options for edit SLURBT axis.
Manipulator type HP3L-B0 with NXC100 controller.
Many thanks for any help.
Not any changes afrer replacyng battery:(
Contoller start on maintenance mode, after initialization of the cmos.bin and restart, All as before.
The video of start controller:
First, thank you for response.
Now I check only fuses available on front panel (9 units) , all OK. (The controller type: ERCR-NS00-A200)
If the fuses installed on PCB, I need take out the modules for check it?
Lights, all like OK. On the digit indicator of PCB, (not on front panel), after power on get "0", after several time "1" "2" "4" "6" and after relay "click" get "E." and all alarm messages on display.
On Monday I take litle movie of all the process .
Best regards.
hey friends
any idea about the problem
it seems to me that there is something that unites all three alarms
many thanks