The panic mode is quite right, it is to be installed on the PC, you can refer to this manual! I want to verify the encryption function, but I haven't purchased the encryption software yet. It is very expensive and I expect the employer to buy it soon!
I have encountered the same problem now, the system version: KRC4 8.3.34, robot model: KR6R700 FLR, error code: KSS26024 confirmed the maximum error (A3) exceeded, in normal use, occasionally this problem occurs, in motion Any path in the range will appear, not a fixed position, this is a problem, I am confused, please help guide! thank，my friends
This problem is normally caused by what is the reason, because we have encountered a similar problem, are using KUKA U disk to reinstall the system, do not know what the operation caused such a failure?
Advertising from our partners
Robotforum - Support and discussion community for industrial robots and cobots in the WSC-Connect App on Google Play
Robotforum - Support and discussion community for industrial robots and cobots in the WSC-Connect App on the App Store