Hi,
I read the ret value is #rsiok. The return value is ok but the program stop hold. Any solution for this problem?
Thank you very much.
Posts by Yvesrobot
-
-
Hello everyone
Recently i use KRC2ed05 controller and the RSI version is 2.3 to test the motion control. I use one byte input to trigger the path correction. The path correction is no problem before i add the ST_P command. The program will hold in the ST_NEWLINK and no error show in the KCP. Could anybody help me to solve this problem?
-
I ever try to run the file direct in the folder c:/krc/util/sr_robottypedata/#kr5 c2sr flr 850. I found I can not run the bat file. Then I copy the folder #kr5 c2sr flr 850 to system32 folder and then run the cmd window. I found the cmd can not run and can not open the window. So I run the "command" and open the dos window and type the "rtfupd.bat". I did not see anything run in the window. Could you tell me how to correctly run the file? Thank you very much.
-
Sorry, I have the same problem. I follow the instructions and execute the file "rtfupd.bat". Why I can not execute it? The error message will show the window "Windows cannot find.......Make sure you typed the name correctly and then try again..........."
Please help me. Thank you!