Posts by padostms78

padostms78 · Smart HMI Error padostms78 February 4, 2020 at 4:11 PM

Hi Panic mode.

Restore is not working this error coming after it.It is possible CCU failure?

Thanks

Tom

padostms78 · Extern Axis change Rotation speed padostms78 February 4, 2020 at 4:08 PM

Hello SAABoholic

Quote from Lemster68

I just do not understand your question. You are asking about rotation speed but mention "diagonal" when axis speed is usually rpm. And you mention 500mm and 600. Can you please explain better/rephrase your problem?

Hi

I have a part Start diameter 500mm End Diameter 600mm.I need more start rot speed and lower end Rot speed.Working with INDMove i can chage the Rotation speed but external axis jumps a little every speed change. The Robot is indepent from External Axis. I hope so is more understandable.

It is possible continious Rot speed changing from start to end ?

Sorry for my bad English .

Thanks for Help

Tom

padostms78 · Smart HMI Error padostms78 February 3, 2020 at 9:07 AM

Dear Community

I have an KRC4 controller with an error on HMI.

any Ideas?

Thanks

Tom

padostms78 · Extern Axis change Rotation speed padostms78 February 3, 2020 at 8:55 AM

Dear Community

I have an IRB 4600 with External axis.I need a help to reduce rotation speed from external axis.My start diagonal is 500mm end is 600.

I have no multitasking.

Thanks for any help

Tom

Advertising from our partners