Thanks. Do you have the function name, cannot find a reference to FN289 at all. Using FD command reference manual.
Posts by Jacven
-
-
Good day all
Sitting with bit of a issue with singularity. Busy with an install using a MC70 doing timber palletising. The issue is during the process the robot has to move through singularity (utilizing Pallet shift). As you can imagine, a 6m piece of timber getting re positioned as j4 and j6 sort themselves out is not ideal. Is there a way to lock J4 and/or J6 so the MC70 acts more like a palletising robot? Or any other suggestions will be appreciated
really don't feel like programming 7 timber sizes and 7 pallet patterns individually
-
Hi
I'm currently working on two CFD controllers and for some reason the Teach Pendants on both controllers won't power up. I have checked a TP from a 3rd Controller that is working and that also doesn't power up. The TPs are brand new, taken out the box this morning and the are plugged in correctly. Anyone else had this problem before?
-
Great. Thanks
Much appreciated
-
Hi
I’m working on MC50 robot. I have the I6080 information message keep popping up code I6080. Can’t seem any additional info on the message. The message that the controller displays is very vague.