yes i have DXF file auto cad file......i need 3D model of the file .....but i don not have other software which easily convert it inot 3D like solid works.....
there is option in roboguide to convert the DXF into 3D model.
but i do not know the process to use that fucntion.....usage of porcess i want to know....or any other free software to convert the file to 3D model....?????
Can anyone help me to get 3D model from DXF file by using Roboguide?
I don't have soliworks and any other software to doing so....
Thanks for reply sir
can you provide me the pinout details.
i want to add more ...........
i dont have TP connect/Disconnect option in the robot.
so please suggest accordingly.
dear sir
thanks for reply
actually my cell was already running in auto mode.
i want my robot to run without teach pendant in automode.
that mean robot should run its producttion program in auto mode without having Teach pendant connection to controller.....
please suggest anything ??????
Hey.....can any one tell me....is soltuiton arm or Dresspack available in Delmia for FANUC Robot.........if i am talking about specifically for spot welding FANUC robot.
How i can done arithmetic operation on palletizing register data itself , not with other data. 
i want to import 900 MB IGS file into FANUC ROBOGUIDE software but its not importing.....can anyone help?
Dear all
greetings...!
can i use more than 256 programs in my Robot....
i am using is R-30iB mate controller
currently am using 8 PNS inputs to call 256 programs but i need more than 256 programs in my application .....please suggest...
Got another Collaborative in today, Just sharing the pic that's all
Buddy do you have manual of this ????
please share
thanks in advance
m new to Robotics please let me know what is SPLINE motion in KUKA .....whats the benefit of this.......?
Display More
just put the master count values from your BOM into the $DMR.GRP $MASTER_COUN
then true the master done bit
go to mas/cal calibirate robot
now check your eye mark on each axis it is matching or not if it is matching then your robot is ready again
if not you have to master by zero mastering.
This will not work if the batteries have gone dead, a pulse cable has been disconnected, or the battery box has been opened with the power off.
You MUST reset the pulse coders, cycle power, jog each axis to establish a pulse, and then master and calibrate.
thankuuuu sir for correcting me
Display More
Thank you all.
FYI, I am new to Fanuc robot. I do not have the maintenance manual.
BTW, I did not know that I should change the battery (A02B-0323-K102:A98L-0031-0028) in the machine active condition.
But, I just changed the battery after turning it off. I think this may cause the data loss?
I cannot jog any axis with the iPendent.
Thank you.
Kim
just put the master count values from your BOM into the $DMR.GRP $MASTER_COUN
then true the master done bit
go to mas/cal calibirate robot
now check your eye mark on each axis it is matching or not if it is matching then your robot is ready again
if not you have to master by zero mastering.
To add to this, since joint 4 & 6 are moving in joint, they will go to a specific turn number. These joints usually have 720 degrees of rotation, so there is multiple positions that satisfy the orientation.
In joint and wrist joint they go to one that you teach, in linear they take the shortest path.
Sent from my SM-G930V using Tapatalk
sir
you tell me what will be the effect if i change turn number 0 0 0 to 0 1 0 for a particular instruction.
The wrist joint option (Wjnt) tells the robot to move joints 1-3 in linear mode, and moving joints 4-6 in joint mode.
It can help you move through a singularity, but the EOT might move in an unexpected direction...
Thank you so much for sharing
Can anybody tell me what is the use of Wrist joint instruction in the end of motion instruction and also what is the benefit of jogging the robot in wrist coordinates. ?
