At least now I know I’m not losing my mind. Yes I thought it was strange 6640/6600 were just lumped together yet they are different. I will also look and see if there are different versions of the manual as mine is also Version Q
Posts by Enki
-
-
Hey Guys,
I have a 6640 I recently did repairs on. I tried following the Pendulum II/Levelmeter 200 manual on calibrating it but I’m stuck on where exactly to mount the sensors for Axis 1 Calibration and Axis 2 Calibration. In the picture below I know under the black cover is the reference point but then in the manual it says to mount my sensor to an attachment on Gearbox 1 for Axis 1 Calibration and my robot doesn’t have that. Also where would I screw in my locating pin?
Second problem is for Axis 2 Calibration, manual says sensor mount point is behind the lower arm but on my lower arm it’s on the front. Where am I going wrong?
-
-
Are you still looking for these robots?
-
I'll let it go for $3200 Free Shipping to anywhere in the world. If there is anything else you are looking for I probably have it.
Check my Ebay store for more inventory http://stores.ebay.com/Raiden-One-Solutions