The KR C4 has an operating temperature of +5°C to 45°C.
There is a heater kit that can be retro fitted to help in lower temperatures (Article Number: 00-275-556)
do you have the link to see the kit??
thanks
Posts by Cardison
-
-
when the robot/controllers stands by for many hours beeing in winter.
-
What device could i use in order to increase the temperature inside the KRC4 (-4°c).
Is there a controlled resistance (official or unofficial KUKA part) that you recommend me?
when the controller reach that temperature it is unable to move niether manual nor automatic
thanaks
-
KRC4
KSS 8.3.22
if you have multiple answers for any kss 8.3.xx comment it please -
the warm up mode only works with PTP moves, once a LIN move starts the Override go back to 100%
what can i do in order to reduce the speed/override in LIN moves?? -
where can i download the R-30iB_basic_operator_manual_[B-83284EN_05] ?
-
every time i press the enable button in the wrong way i need to restart the controller in order to get the "i" insted of the "o" in t1 and t2
how can i solve this problem without restarting the controller?
thanks -
Where can i see the external start secuency in the KRC folders in workvisual. I think is hidden, but how can i get it?
also i would appreciate if someone share a link with the external start kuka-plc setting the timers of the "handshake" -
I am working with the Work Visual 4.0 V4.0.18, the divice that im trying to configure is a profinet CUBE 67+BN-PNIO.
I already install the GSMDL given by the provider Murrelectrics GSDML-V2.3. And obviusly i have the profinet thecnology in my controller.
I set the IP, i then i click Apply, Ok. Then i download the program to the controller. No error message shown, But the net is never ok.
Im using another software in order to set the IP and the subnet mask and the LAN works ok.
Anyone that could help me please. I want to set the ip with the work visual
