Posts by sambhaji

hi pls let me know how the PALLET RESISTOR QORKS IN THE FANUK ROBOT. and what the purpose of this resistor

please support how to resolve this issue.

krc2_compressed.pdf

congrats for the finding issue .

Can i get the operating and instruction manual of the this KRC2sr controller.

Please share if you have .

My mail id is sambhajik28@gmail.com

Whats up no +919657586869

we are facing issue on teach pendant ' waiting for cyclic connection'

Please suggest the solution

I am trying to forcefully on the digital outputs but itis not getting on. What should i do.
Pls find attachment

Wiring has been checked but it is also ok , mac id and boud rate (dip setting) on other side (fronius weld source/devicenet) is ok . Where can we check robot ready signal is getting onor off on robot.also there is one more concern no-one outputs is getting on by forcefully through the teach pendant.

Actually i have same issue in krc2 , i hv checked iosys, device net ini it is ok still that is occurring

Can anybody help me to resolve below below error of kuka krc2 robot
Machine data error
Kepad is not working

Quote from salesw2

What has been your favorite robotic welder and why? I'm looking to buy a new welder for an older robot and would like to hear others opinions and experiences in general

I've used Lincolns/Fronius/ESAB previously with Lincoln edging out the competition due to their support and parts availability (but not by much). I've also had experience with older and more obscure brands of European welders that have been a complete headache due to translation errors in manuals and lack of interface options.

Fronius welder isnthe best for arc welding if it interface with KUKA robot, and for Motoman their own welder is the best for arc welding

Can you provide screenshot of this macro

Hi,

we are facing below error on EPSON RC+

Robot controller Error : 173
Torque error in the low-power state, Robot 1, joint 2 Reset required

please suggest the possibilities of this error.

It would be grate if anyone will provide the manual or technical support for fixing this bug.

sambhajik@irasautomation.com
+919657586869

Thanks for your helpful reply

if you have any other brand please suggest

we are located at India/maharashtra/Pune.
expected robot payload 1 kg , 4,5 or 6 axis
brand _ MOTOMAN, KUKA, ABB

Budget _ up to 3 lac

Hi,

we need second hand robot in working condition for the purpose of institute training.

is there anyone want to sell please replay on my mail,

sambhajik@irasautomation.com