Softing provides software solution, single license stack, but have to order minimal quantity.
你们量大的话可以一起团购?
有软件解决方案?是协议栈吗?给个链接看看
Softing provides software solution, single license stack, but have to order minimal quantity.
你们量大的话可以一起团购?
有软件解决方案?是协议栈吗?给个链接看看
M.Ozkan, great thread, cp1616 is one solution. it's a hardware solution.I wonder is there any pure software solution?
大兄弟 , 你功能实现了没有?
You can get it for exmaple from there:
http://industrial.softing.com/en/products/so…or-windows.html
Hi hermann, I have downloaded the demo according to your link .
However , I can not understand it , can you tell me how to use it ?
SkyeFire ,
I have read this post before and it is no use .
M.Ozkan, great thread, cp1616 is one solution. it's a hardware solution.I wonder is there any pure software solution?
Hi irobot, have you solved the question about using Ordinary pc to control robot via profinet without other hardware ?
Is there any pure software solution?
I am studying profinet now , and I am trying to communicate pc with robot using profinet , doe someone has Profient specification ?
I am using a pc to get and set I/O of robot via Ethernet/IP . Now I can use Forward_open Request to establish a I/O connection between a pc and a robot , and then robot will contine send udp data containing the info about robot and I/O to pc,
the first question is the connection can only keep about 10s , 10s later ,robot will not send udp data to pc ,and the connection will break.
can someone tell me why ?
the second question is : How to set I/O of robot from a PC via Ethernet/IP ?
I am using EtherNet/IP to send data between UR and PC. Now , I can successfully send CIP data to UR and get lots of info such as I/O , Tool .
However , I do not know how to set the I/O value of UR from PC ?
By reading UR EDS File , I send cip data to UR ( service=Set_Attribute_single , classID=0x04 , InstanceID=0x70 , AttributeID=0x03 , + request data ) for setting I/O value or Register value . and then I send cip data to UR ( service=Get_Attribute_single , classID=0x04 , InstanceID=0x64 , AttributeID=0x03 ) for getting I/O value or Register value .
However It is inoperative , who can tell me why?
At the same time , the EtherNet/IP light is always yellow , does it need to be green?
At last , what is the function of Connection Manager section in EDS File ?
Do you communicate PC with UR via EtherNet/IP ?
When we use EtherNet/IP to send data between UR and PC , the Tcp Port should be 44818(0xAF12) .
Now , I can successfully send CIP data to UR and get lots of info such as I/O , Tool .
However , I do not know how to set the I/O value of UR from PC .