Hallo..thank you all for your help, especially...Repair KUKA
Posts by barsa
-
-
e mail:bandabandita@gmail.com
-
If you have measured with a multimeter whether +24V voltage is reaching the KSD and the LEDS are not turning on, the error is in the KSD. There's a way to power the KSD on a workbench with a power supply just to make sure the problem is in it. I know how to repair a KSD, if you need any support or help you can contact me.
On that top connection you will find a 24V indicator and a GND. Feed on a bench, if the LEDS do not light, the error is indeed in the drive.
I disconnected the drive and opened it on the workbench. I didn't find anything suspicious, that some element was inflated, for example. I changed some electorlites even though they were not suspicious. After that it did not give a good result. Everything remained as before... it does not work.I contacted khs.. they suggested that the ksp be checked, which is a bit funny because the other two modules light up properly, that is, they are all connected in parallel and are responding.
I know how to repair a KSD, if you need any support or help you can contact me.
Yes please...tnx in advance...how can i contact you? or if you can send me the procedure how to try to fix it.
-
Have you tried replacing this KSD?
we disconnected the drive and we determined with the instrument that there is 24 V coming in, although both indicators on the drive do not light up...both (red and green) are turned off. which according to the scheme means that there is no 24 V power supply.???
khs was contacted...I'm waiting
-
thank you panic mode , I can say that both 3 end 5 red flashes quickly.
the number of pulses..I really don't know.
-
Display More
so it is not a Kuka robot, it is some a custom kinematic that is controlled by KRC1A or KRC2 (not KRC2ed05)
why not post KSS version, screenshot of the diagnostic screen
what is the status of the 6 LED indicators:
-
I didn't try to replace because I don't have another.
-
thanks guys for your time,...I've never had a chance to change ksd...and I don't know if it's up to him, but I'm going around in circles. Two or three days ago, I managed to get the machine to work normally from 4 to 5 attempts by turning it off/on at the switch...but the last two days, I have not been able to do it after multiple attempts. This is a khs innopal robot made on the principle of kuka-khs partnership. That this machine has three axes...A1..A2...A3..and I can't do anything with a single command on kpc2 because it immediately asks for acknowledgment of the blue button in T1. So properly install the xp operating system, HMi...hook software v5.2.9/ KHS V2.02....
Only three KSDs +KPS600
-
Dear Freind...How is the SBM Kuka replacement procedure going, because it is obvious that the servo module is causing the problem. By turning the switch on the krc cabinet, the other two modules properly signal, but this one looks completely dead.
-
Tnx thank you for your answers. By the name "screen" I meant the kcp where the robot reset option was automatically turned on, which was always on for an unknown reason, where the operator does not use that option at all. Inside the small cabinet, one module was without a light indication. Finally, from more after shutting down, the module literally got a green signal light as if it was functional, but the robot reset was still on (correct sign) on the screen in the options. After turning off both cabinets (large and small) again, the robot reset confirmation sign disappeared. The robot now works normally ...
-
Hallo...I have a problem with khs krc 2 innopal palletizer. After turning on the computer, i.e. the cabinet and booting the xp system, the reset robot option is constantly on the screen, which cannot be turned off. In the cabinet, one of the modules does not blink at all!
when I press the start button on the console, the band in front of the rubber table, the small and large part, spins very fast and immediately ejects the error in T1-bof to be canceled. with immediate cancellation and the next restart, the same thing happens. I noticed that the reset is constantly on and it happened after the first morning ignition.
-
I have KHS robot name LB 57 252 ,type khs 3 Asher KR C2 windows version 5.1.2600 ,bios version:KUKA Roboter .....made by 2005 year.
Old hdd has stopped working... another hdd installed... now we have only 8 programs added but are missing 9 ,10 ,11
my question :how to activate missing programs 9.10.11. which is the procedure????
-
thanks for your reply. but the problem is that I have tried without success. Here the user. . administrators and experts. I tried the option copy / paste, but no effect. . . programs under numbers 8,9 and 10 still missing. Procedures must be...
-
Hello to all active members . I desperately need your help to solve the problem . The problem arose when the original hard drive stopped working and was defective. because I had a copy of the hard drive I just copy the same content to a new hard drive . The problem arose because no more new things . The good thing is that I have the last backup on the 15th 08th 2015 years made the KHS staff and where have all the latest information and updates . My question is :
How to backup that is located on a CD add the hard drive and get all the latest changes and new formations that are now missing.Procedure how to do it...please.tnx in advance
I will add pictures later.
thanks for your reply . I expressed in the law . cloned HDD before and it is an old clone which is now working on the machine . When they entered the last new things , new formations , did not clone the entire hard drive and I made a mistake . What has occurred in the last backup , and what I need is that someone goes through the process of how to successfully backup stored on the HDD -
Hello to all active members . I desperately need your help to solve the problem . The problem arose when the original hard drive stopped working and was defective. because I had a copy of the hard drive I just copy the same content to a new hard drive . The problem arose because no more new things . The good thing is that I have the last backup on the 15th 08th 2015 years made the KHS staff and where have all the latest information and updates . My question is :
How to backup that is located on a CD add the hard drive and get all the latest changes and new formations that are now missing.Procedure how to do it...please.tnx in advance
I will add pictures later.
Advertising from our partners
