DX200 _ MH1440
Posts by robotik
-
-
Hi my friends
There are no alarms when the robot is in teach mode.
When the robot is in remote mode. Alarm 1649 is generated.
How can I fix this alarm?
-
Hello friends
We need to 4 external axis control with robotic GP12 robot
The Motoman robot controls up to 3 axes
How can I control axis 4 of the robot?
-
Hello friends
I need software Ladder Editor For DX200
How can I download the trial version of this software?
Thank you for your help
-
share a video
-
The bolts are tight.
Yes. Everything is mechanically strong inside and out
If you put a bottle of water on the axis of a robot and then start SERVO_ON, you will see vibration....
-
When we start the servo_on, The robot vibrates at the end of the axis.
We performed servo_on testing on two robots, MA1440 and MH180
Vibration on the MH180 is very low
-
Hello friends
We wanted to recording video with MH50 robot
But we have tremors during filming
This is a vibration for the robot
Is there a way to minimize this vibration?
-
Hello friends;
we needed to format an SD memory.
By pressing the "interlock+9+select" key combination, we were able to enter the YRC1000 controller operating system.
Then we went into Windows CE and formatted the memory. Then we turned the controller off and on.
The system was never loaded after turning on the controller YRC1000. And as before, the Windows CE operating system was loaded.
Thank you for your help
-
I need extension mtd file.
-
There is only one ES165 model in the PowerMill software library.
How to update the library of this software?
-
Hello friends
I work with PowerMill software.
I wanted to import the MA1440 robot in this software.
I need a file with "mtd" extension for this robot.How do I create an mtd file for each robot model?
Thank you for your help
-
How can a robot be mounted from the ceiling?
Please write down your experiences
-
-
Thanks for fixing the problem
-
Hi
When I start the robot it stops in this line.
What is the reason for the robot stopping?
Please help me so that I can not fix the problem
-
Yes, I have done the comarc calibration before these welds
Two tests must be performed when setting up a COMARC weld.
1. The first is Phase Compensation test
2. The second is a Sensing Test -
Another welding model
-
Another welding model
-
Hi
Why we have defection in comarc arc welding?