Alexandru the robot have a communication whith plc siemens.
Do you have any experience whith this?
Thank you
Alexandru the robot have a communication whith plc siemens.
Do you have any experience whith this?
Thank you
Hello Alexandru
I have the fieldbus board confugured.
What you mean "I have used BITS command for the variable type"
Can you explain, maybe a example..
Thank you.
Hello,
Robot: CX110
Controller: E02
For a profinet communication and exchange variables/strings we need to use the same comands like in TCPIP communication?
I just need to receive a variable to decompose in position of the robot!
Anyone can help?!
Thanks
Thanks kwakisaki.
Very useful and clear.
Hello everyone,
I'm using Klogic/Kladder for the first time and i needed to know how i connect the internal relays (M) of Klogic and those of AS (2001...)
Tanks
Paulo Magalhães
Ok. I will try again and post here the parameters and the error the gives me.
thank you.
I had already tried this but it gives me error soft limits.
If you can tell me what the value to place in the limit of parameters and an example of code to place the external axes to run was excellent !!
Thank you.
Thanks
How do I set two external axes to work as spindle or endless ??
Already I configured for asynchronous and have no errors but can only move in manual.
I can give speed and start and stop when you want to end the movement?
Thank you
two external axes
How do I set two external axes to work as spindle or endless ??
Already I configured for asynchronous but can only move in manual.
$ ASYSPTP = ?????
I can give speed and start and stop when you want to end the movement?
Thank you