Are there any NEC codes or rules relating to DC wires with specific regard to color? We will be installing a light sculpture in NY and we have to connect the wiring from the power supplies to the terminals within an enclosure. I know generally red is positive and black is negative, but if I use a different color for red such as white, could we encounter issues with our installation being not to code? PHP Training in Chennai | PHP Training in Chennai | Web Designing Training in Chennai
Thank you in advance!
Posts by jacobanthony
-
-
Automatic welding systems automate the welding of a very limited range of products. They usually work within the outline of the machine's base. Thanks for providing this useful information about robotic welding machine. VMware Training in Chennai | VMware Training in Chennai | VMware Training in Chennai
-
hi i have got 2 second had viper s650 robots the batteries were flat in them so i have replaced them and started to re-calibrate the joints it calibrates ok (cal.c =0) but the rsc data is not saveing in the robot it is coming up with (as seen below) what could be the cause of this thanks
mattformat of the RSC is different from the one you are trying to program. The commit operation is aborted.
-
I read all of topics in this forum, but I didn't find any similar problem and solution for our problem.
We have a type irb2000 (with S3 controller) ABB robot. We have been working with robot for almost 1,5 years. But the robots was broken down 2 weeks ago. The first problem was the controller didn't store the system parameters after restart the system. We changed the CPU board and this was working again, and change back to the original board and the storing is OK now, but the machine is not working.
The main problem is that after starting we got the message, robot is not synchronized. From the beginning we involved the local ABB Service, and based on the received information and the manuals we see we have absolute measuring system where the synchronization is not necessary. Instead of this we should complete a resolver calibration process. We done it, store the parameters into the EEPROM, and restart the machine. When we start the controller with <1> button we experienced that tha Axis-3 and 6 move a little bit (some degrees), the brake stop the motion and we got SERVO ERROR and 536 SAFETY ALARM message. After this we cannot cancel this messages, only with the main switch.
If anybody has ideas what we have to try, please write here, because we have no plan how to solve this problem.
My other question would be in connection with the resolver calibration process. The manual describes that the original resolver parameters we find under a cover on the 2nd axis. We found these. But we think these parameters belong to a special physical position of robots. Is it right? If yes, how can we set this position on the robots. (We tried the calibration when the marking scale at the axis were at zero, but not working.)
Sorry if I am a little bit long, but I try to write every experience about our problem.
Thanks in advance.Hi Jacobanthony, please try and stay On Topic.
Rgds Moderator -
I don't know what you mean by monthly service fee. Wifi is just a connection method. If you go somewhere that offers a free wifi connection to the internet, like a coffee shop, then true wifi devices can use it. VMware Training in Chennai
I imagine somebody will or has built a wifi dongle that attaches to your camera's USB port. Then the problem is getting the camera to use it. If cameras actually had an operating system (I know a few do), I'd guess that would not be an issue. VMware Training in Chennai