Posts by cavan223

Hi wondering if you give more detail how you managed to fix it

Did you remove the flash drive clone it to used flash drive then reinstall it

found the problem fixed

Replaced flash drive

I have 2 s4c plus controllers irb140 and irbr6400 both of them have 64mb flash card 😀 also noticed some S4C Plus controller have 1GB memory

DSQC623 computer has a 256mb IDE Flash Module:)

Hi yes it's small but only holds 1 system with 65mb spare

User drive empty

Photos of both partitions and files I can't see what's wrong?

strange that system faulted after deleting current system I think it's a ABB big Bug

Hi SomeTekk

Copied the files back as above in the Bin Folder when starting the controller.

it continues. Displaying connecting to controller?

I brought a new ABB irc5 hard drive version 1 ebay unopened looks to me it needs DOS formatting FAT32.

there're no files on it? and my windows 95 system won't recognize as a drive.

There nothing wrong with compact flash drive I used the service port check file system and there' no issue upload or downloading files via FPT or file zilla

I need a boot image if any one willing to help me out please

Tried changing CMOS battery still no luck

Hi all I did the same

Tried to do a clean install x start. Unfortunately, I don't have a disk image only back file and boot up system files on USB.

I tried using an USB system install no luck same issue as when downloading system files via service port

Any advice I'm stuck

Thinking of removing the flash disk from controller transfer the 3 files on a USB drive directly on flash disk with using my desktop computer.

I don't wish to corrupt the drive easy to do when connecting flash disk to desktop

I had the same error loose wiring from the beaker board to rectifier

I had the same issue last week I found it be loose connection

Hi wondering if any one has a manual for setting up multi-move for 2 s4c plus controllers

Hi all I'm attempting to do the same as above I'm not sure what file to change S4CPlus controller and the

Procedure to change IRC5 controller

you have a corrupt system I had the same issue once there's 2-3 files missing on the flash disk allow the system to boot your need to find them you must of removed or deleted them if you have a spare flash disk copy the hole drive over then at startup delete system reinstall with robinstall

attempting to clone corrupts the drive I've tried several time

used ftp transfer the data if you can't your need to reinstall new system

maybe if you have a old computer with windows 95 your need to format the disk

I’m trying to use call routine loadIdentify I’m getting issues I’ve entered correct centre of gravity points data from tool calibration but still getting errors I have no idea why any help please

R