Hello,
I have saved them with All of Above option.
This file backup I did for all of our robots, in case that something bad happens and we need to change the robot.
Sent from my HTC Desire 510 using Tapatalk
Hello,
I have saved them with All of Above option.
This file backup I did for all of our robots, in case that something bad happens and we need to change the robot.
Sent from my HTC Desire 510 using Tapatalk
I have tryed. It s the same situation..
Hello,
I have a problem with loading files ''All of above'' on a spare robot.
We have 1 spare robot and 4 robots in use. So I m trying to load files from all of the robots (one by one) and test them.
I have saved on servers files for all robots with the option All of Above.
So when I m trying to load a specific robot files, I get the errors wich you can see in the pictures attached.
In the description of error it says "file format incorrect'' but I can t see why it s incorrect.
I m trying to load the files to robot E11697 R2000iA/165F RJ3iB CPU 16 MB, FROM/SRAM 16/2 MB from robot E-14300 R2000iA/165F RJ3iB CPU 16 MB, FROM/SRAM 16/2 MB;
Any Ideas?
Thank s in advance.
Hello evryone ,
Today our R- J3IC controller got stuck in cycle start waiting for command to go.
The controller has outputs to a slc 500 through an I/O card and while the stuck period it cutted out the outputs.
I pressed the emergency, it didn t faulted; changed from AUTO to T1 it didn t happend nothing .
In the TP i was not able to change nothing.
I temporay solved the problem with a cycle start and it is ok , but we don t know what s the real problem behind this.
If somebody has an idea please help us .
Thank s in advance!
Thank you all for your sugestions!
I solved the problem by downsizing the CF from 4GB to 64 MB and it worked . Thank you kluk - kluk for your sugestion!
I m new on this forum but in the future I will try to help too with what i can.
Hello everyone!
I need help with a controller image backup.
We buyed 2 secondhand robots and we need to install the Ethernet IP option. In order to do that I have to back an image of the controller to send it to Fanuc guys.
My problem is that it gets stuck at first line .
''Writing MC:\FROM00.IMG (1/18)
and it blinks here.
The MC i'm using is a Kingston Compact Flash 4gb.
I have attached a picture with the TP.
Thanks in advance !