Iowan
Yes my problem solved. Now my robots all settings back up Kfloppy.
Posts by byrol
-
-
Iowan
Kfloppy download is OK..
I am very grateful to you..
Thank you very much.
Thank you very much... -
Iowan
no mail and spam.
birolanilir@gmail.com please give me a empty mail. And I can add your mail adress. Please send me empty mail... -
Iowan
Our goal is not to disturb you. Soryy.. I wait your mail.. Regards... -
Why nobody help me?
-
Why nobody help me?
-
Iowan
I waiting yor mail. Again please send me. -
Iowan
Check my mail but not come in. Please again send me? birolanilir@hotmail.com or birolanilir@gmail.com Please again please... -
I have a Fanuc KFloppy Diskette. But files are broken. I couldn't find on the internet. Where is download webpage? my mail birolanilir@hotmail.com
-
Hi everyone;
My robot Fanuc RJ2 420IF. And Profıbus DP Card A16B-3200-0220. And Profıbus Modul PHOENIX CONTACT ILB PB 24 DI8 DIO8.
I have Phoenix Modul GSD file. But I can't do the necessary settings. Phoenix Modul BF led is RED. Pictures and gsd file are below.
For the settings I would be glad if you help in a detailed way. -
Thank you to everyone for all the answers .
-
kluk-kluk
thank you.. -
Matheus Marques
You could e-mail ? kfloppy.exe please. My system Fanuc RJ-2 420 İ F
my mail birolanilir@hotmail.com or birolanilir@gmail.com
Thanks... -
dmbj
thanks. -
DaveP ; thank you for description...
-
kluk-kluk thank you very much..
Today, I tried doing the same issue in other robots . I'll try a little bit to rectify the fault. I write to you if development.Thank you. -
kluk-kluk thank you..
When we first give power to the robot, PRIO-100 alarm again. And Menu-I/O Setting/Digital Enter/ anc I do configuration again/Func/Save/ and display Saved DIOCFGSV.IO. And push Reset Alarms OK and not display PRIO-100. Power off-on Robot. Agaın PRIO-100 alarm..
-
Robo_Eng_13
Thank you for your answer. My problem is exactly as follows.
My robot RJ2 420 İ/W and my I/O lınk device A03B-0808-C001 and extended modul A03B-0808-C010
I made a connection in the wiring diagram in the book. But PRIO-100 I get alarm.
And I push Reset buton but agaın get alarm. I push Shıft+Reset and OK. But pull Shıft and agaın PRIO-100 alarm.
I bought the first robot was installed Profibus card . I rif off Profibus card beacuse I have not Profıbus equipment.
Also; I can do ON the DO output of releasing the shift key . But DI ınputs look the voltmetre and 24V DC I read.
I would be very grateful if you can help . -
I opened the topic on this site does not say why no one answers ? I did not understand Unwittingly , I wrote something wrong
-
RJ2 for Model B I/O Unit
digital input signal ? 24V DC voltage or short circuit ?