Thank you much, I will dig around and try and find some programs. Let me know if you are interested in some work or trade. We have a small metal shop here with some Finn/Prima-Power stuff, SG, LB, some Press Brakes and a Night Train. Maybe we can work out a trade or something I don't know.
Posts by S700fanukbot
-
-
It is my understanding that our particular controller will only read the compiled code from Karel that is uploaded to it. I don't mean to say that I "need" Karel or give the impression that I'm looking for some free software handout. I'm just looking for a way to get this particular Robot to do anything other than collect dust in our shop. From what I've gathered if there were a compiled Karel program with say 200 or so points on it I could try and manipulate those points at the teach pendant to get the desired path I'm trying to achieve. Basically I want to attach a router and clean the weld slag off this path in Orange around the Black lines, the attached drawing is the top view.
-
Heyo all, we found an old S-700 robot in our shop and I am trying to get it purposed to do some simple finish work. Turns out Fanuc isn't all that helpful until you drop a bunch of money. Can anyone here recommend someone with Karel experience or with Karel software to write some code or might be interested in some work? Here is the robot info I have -
Fanuc System R-H
Robot S-700F-19271
Fanuc System R-Model H
Type A05B-2080-B001
Serial No. E94601170
Date 1994-06Ports
RS-232-C
CRT/KBI also have kfloppy,ttermpro,winOLPC,winTPE, and some other old school stuff but I'm lacking the Karel software to do any testing.
Any help with pointing me in the right direction would be greatly appreciated.