I think problem is with creating project in TIA portal. I tryed for curiosity create same configuration in Step7 and TIA Portal, but project from TIA doesn't working and looks same problem what its description in your post.
Posts by jurii
-
-
Hello, i was worked with 3 different firmware 2.1 (upgrade to 2.2), 2.5, 2.7 and kss different version without problem with compatibility.
Sometimes this card have a problem with downloading project to card after that show this message, you must use factory reset card and after that download project again. -
If ping controller working and project download from controller without problem.
Then try turn off firewall, sometimes is problem with firewall block. -
Look like problem with communication between KSD.
Check last post in this topic https://www.robot-forum.com/robotforum/kuk…ernal-7th-axis/The problem has been found,
My hand-made KSD cable is not connected ground,
When the robot start running, electromagnetic interference caused KSD communication failure。 -
Here is X11 diagram for KRC3
-
Yeah I know this .src is only for imagine how works program.
Main problem is i doesnt know how get program from controller to MultiProg software, how connect to KCR controller (network configuration on PC site)?
I search some monual to proconos but only what i found is for version to KRC4.Thanks
-
Hello,
I need help with understanding how works KRC2 v.4.1.6 with proconos and specify PlastTECH package.
My main questions is where i found softPLC program (maybe i must edit some parts this PLC program).
In attach example program.Thanks