into a program TPP
SO[6]=ON
into a program TPP
SO[6]=ON
Hello everyone,
When I try to activate the LED of button 2 ( SO[6]), it lights up but immediately turns off again.
System: Rj3ib, Version V6.40, handlingtool,
No Back-ground logic
No Macro
No interconnect
Did a Init start
Can't see where else to look...
Anyone's idea?
Thank you
I just had the same problem.
Your posts helped me
Just happen to me.
My vent was clogged too!
Now up and running!
False, Roboguide support Basler camera. I do it myself.
Download the Pylon app from Basler to set your cam IP.
Then use Explorer from Roboguide and the cam will be detected
HI,
I know many ways to do it.
Weld offset, leader frame, modify your frame position, offset frame...
But since you have all your welding programs done I would suggest this:
1- Use the function "Frame offset" to set all your program into a common frame.
2- Using simple PR manipulation, relocate this frame to the JIG location, just before welding.
3- Call your welding program
this way, you will keep a low volume of programs.
If you have to alter a welding program, you won't have to do it in all the other same.
Hi Dominic,
you posted this:
"I have found the solution to changing the register's model ID, just posting here for anyone else that might run into the same issue in the future. Thank you."
Do you mean that you found out how to choose the desired ID instead of the ID automatically returned?
I need to set different origins for a same part. This way, I want to select the pick position from a given ID.
Can you help me?
Bye the Way, I speak french. I try to do my best in english
I had the same issue.
What worked for me was to uninstall my anti-virus.
I run on Window 10.
It never happen again
Hi,
I'm trying to map the UOP signal to a virtual rack on a Fanuc R-J3iB.
I did it in the past on a R-30IA. Does someone know if I'm trying something impossible due to the controller version?
Vadimas,
Where in the menus is this seeting table?
When I tried to run a weld program I get a ARC - 046 Weld EQ communication error
The arc won't start at all.
So I tried this :In Arctool setup (CTRL Start) I have changed equipment, cycled power and changed equipment back.
I can do Wire + and Wire - with shift key.
The Weld unit is online... (powerwave 455m arclink)
Can someone help me?
Hi, I have a Lrmate 200ib 3L with a controller RJ3IB.
It has been on shelves for years (2 or 3).
At start up, I got multiple faults showing up: SRVO-264, SRVO-218,SRVO-003, and SRVO-001.
-264 (circuit abnormal 1)
-218 (Ext. E-Stop/ServoDisconnect)
-003 (Deadman switch released) But I'm in auto mode!
-001 (Operator panel E-Stop) which is in in normal/safe posidion!
What is wrong with this robot?
solved
Broken wire caused by shipping!
Hi every one,
I just purchased an used robot : lr mate 200iB - 3L / R-J3iB . It has been on shelves for years and never been used.
When I powered it up, It calls alarms "bzal" on all 6 axis which is normal and also SRVO-219 :Fuse blown FUS2/.
The fuse didn't blow and is in perfect condition. I restart it, same alarm. I replaced the fuse: same alarm.
Does someone knows where to look at?