Posts by Cho. Sung Ryong

TP에서 가와사키 D 콘 모터에 가는 방법

Hello~~

Here is a Korea (R.O.K)

I am using the FD controller

I would receive an offset value from the Cognex camera serial communication (RS-232 ...)

How to set up the system and method for programming ...

Thank!

e-mail: new_mark@naver.com
blog: http://blog.naver.com/new_mark

Hello ~
The communication with the PLC and CC-LINK to the current ABB IRC5
I want to receive data sent from the PLC to shift
Yasukawa M register as a robot ...
I wonder how this is ...

Thank you!

The protocol known as LG Philips
So set the RS130 ~ 138
Is not it ??

And now the CC-LINK option being used
Is there a possibility that this conflict ??

Thanks to the ripple

Ethernet is not used

Only use the RS232

No problem NX100, XRC was

Hello ~
DX100 has now set up
Should the RS232 communication
NX100, XRC has already tried it several times

Parameter setting ...
FD003 1
FD053 3
FD074 1

RS000 2
RS005 0
RS029 1

RS130 8
RS131 0
RS132 0
RS133 7
RS134 10
RS135 90
RS136 90
RS137 0
RS138 0

The communication cable is ...
2-3
3-2
5-5
7-8
8-7
Case Shield

XRC, NX100 was no problem in

The DX100 is not ...

I do not know if something changed parameters ...

Wait for help

Thank you.

We know about the menu

Do I have to purchase a software option?

If one of the two robots

One feature of the space robot and the

If one has the space robot functions

Can I use the software to backup?

Ever

Is not how space capabilities to enable system variable?

I await your response ...

Hi everyone?

I'm setting up a robot from South Korea.

I would like to know how to use the functions in the space Fanuc robot

Space menu in the setup menu is not ...

So just in the program are using the DIO signals.

However, it is uneasy state.

Help