What you have shown looks to me like this is to change a currently built TCP. You didn't say if you are replacing something else that had a defined TCP? Is it a HyDef Plasma torch that has a Heni light that screws in place to help with programming a center point? You would have to find the center of your torch and build a new 5 or 6 point TCP and I suggest you name it Plasma Torch.
Posts by softie
-
-
Forum,
Where in my backup of my Fanuc do I find a readable file of my weld schedules?
Thanks!
-
To all,
As a guy that daily has to deal with old, ie:Windows 95 robots and has new robots as well. It's a no brainer. The old filing systems like floppy disc drives, arms with belts that need adjusting, no parts support....ect. it's just not worth the pain. To keep them running requires support and $$$. I've managed due to low volume product. However if I can buy a new robot at todays prices and improvements in software and built-in HMI I would do it. Being a welding guy since ABB S2 version the new thru-the-arm cables are much easier to program.