You need power cable and data cable?
If you are interesting you can contact me on gasper.info@gmail.com
You need power cable and data cable?
If you are interesting you can contact me on gasper.info@gmail.com
Move enable... check x11 connector
Castrol optigear ro150
Check all connectors, I had similar problem. The issue was loose wires
Hello,
If someone have gas spring in good condition, I’d like to buy it.
Contact me on my email: gasper.info@gmail.com
Check all connector pins
Try to change KPS
Available also complete documentation and software for pc APS archivirung
Hello,
Do you guys have some robotic arm or 2nd axis reduction gear for kuka kr125 year of manufacture 1996, payload 125kg? Looking parts in europe.
If someone have something please contact me on my email gasper.info@gmail.com
Best regards, Gasper
Could be good if you tell us which types of robots you have.
Regards
Hello,
I have for sale analogue mastering tool, brand new.
If you are interested you can contact me on
gasper@poliranje-ravnikar.com
Spare parts for sale Kuka krc32:
-main transformator
-teach pannels
-teach pannels cables
-power supply
-memory units
-safety card
-servo amplifiers
-phoenixcontact interbuses
-motors
-robot arm ir360 30kg in working condition(new wrist 4,5,6 axis) without electric cabinet
-and much more
For more information contact on email gasper@poliranje-ravnikar.com
Check PC power supply. I had the same problem 2 months ago. First we tought that is HDD, but later than I figure it out, it was Power supply. Changed it and robot works normally.
Regards, Gasper
repairsolutionuk, I have several KSD and KPS for repair.. Do you also can repair it? give me some prices on private massages what is the cost of repairing.
Thanks and regards, Gasper
thanks panic mode. I'll check also data cable. Batteries was also changed one month ago.
But now robot works without any problem, I'll see what will be in next few weeks.
Regards, gasper
Hello,
Year of production of robot is 2004. RDW card is changed last year, KPS is changed also last year. Robot lost calibration by all axis.
It lost calibration in last 3 weeks, 4times.
Thank you in advice, regards, Gasper
Hello everyone,
i have kuka kr30 krc2 controller, and sometimes it lost calibration. KPS and accu is changed.
Someone know what could be?
Thanks and regards, Gasper
5th axis is not in the right position by the calibration.