I had the same struggle. Then i closed the excel file and then it was possible to import.
Posts by Tobi
-
-
What kind of cams are you using?
We had the same issue here on a robot mounted 3DV 400 cam.
We are pretty sure it is the contact inside the camera housing is not functioning.
-
Hello!
I had the same issue in 2019. Many calls and a visit from Fanuc later the solution was to change the software edition to a previous version.
Never had this problem since then.
Below is the version info from that controller before it was fixed. i guess you are working on newer versions anyway so maybe not so helpful info.
VERSION INFORMATION::
SOFTWARE: ID:
LR HandlingTool 7DF1/15
S/W Serial No. : 88340
Default Personality (from FD)
LR Mate 200iD/7L V9.10P/15
Servo Code : V04.00
Cart. Mot. Parameter: V3.00
JNT. Mot. Parameter : V3.00
DCS : V4.2.6
Stop pattern : C
Software Edition No.: V9.10P/15
Update Version : None
Customization Ver. : None
Root Version : V9.10121
Boot MONITOR : V9.10P/10
Teach Pendant : 7D0A/01P
Browser Plugins : V9.10121
TP Core Firmware : V9.10P/15
TP Operating System : 01.4/7.0
FPGA Version : 13
Media from FRL 11/21/2018
-
Actually, on newer software versions (i don´t know from when) it is posssible in config to set "No motion PR operator mode" to TRUE. This makes it possible to modify a PR in a background program.
-
I have had the exact same issue last days on an LRMAte. My Fanuc representative couldn´t find the solution.
Doctor_C, you have made my day!
This solved the issue perfectly.
Thanks!
-
Awesome!!
Will be used a lot. -
Exellent guide.
I haven´t had to do this but i will keep it in mind as i am sure my customers will be in this situation sooner or later. -
Hello
Does anyone know if it is possible to use a3D mouse in Roboguide?
Mine isn´t functioning. (3DConnexion space navigator)Tobi