Just have the PLC send the signal for real.
Posts by dmbj
-
-
Thanks for the heads up on that forum, I did not know it was here.
Anyway I signed up but as of right now I still have (No Access) on all topics. I'm sure it will get resolved soon.
-
Here is a large one I made because the fanuc ones were not large enough for me.
-
I usually do something like this in BG
if DI[x]=on F[x]=on
then in your motion program look for the flag
then after you use it turn the flag offthe flag will then go high again when the DI goes high again.
-
Honestly though, If you call fanuc I believe they will email you a temporary link to download the 4 gig or so dvd, and it comes with a 30 day trial. licence, after that I think the universal software licence is something like $$$$ a year. I never had to pay for mine so im not sure exactly how much it cost.
-
If you are changing spindle speeds, as I'm sure you will, you will most likely want a plc to control the VFD.
Look into PDS spindles, You will like them
Master your robot as precise as possible for N.C. type work.
There is a procedure to "Signature Master (calibrate)" your robot.
make your user frames and tool frame perfect. tram in your spindle until it is perfect. you will make .001 degree adjustments until it is perfect.
Have fun, this is not a beginner task
-
I do the 3 point just like in the video all of the time (just did one today)
make sure your tool frame (for the pointer) is good
Make sure you are in that tool frame and i usually use uframe 0 while recording other user frames
-
Inputs
[1-16] Rack 1 slot 1 start 1outputs
[1-16] Rack 1 slot 2 start 1 -
I think DCS position check started about rev 7.2.
however
remember the safe side is not safe for the robot to go into. it is safe for a human to be there. so almost always set up your safe zones as diagonal out, not in.
-
44818 sounds like a Ethernet tcp port number
-
it sounds like you are talking about Fanic irVision but really cognex.com is where you want to start for a inspection vision system
-
try this, on boot up hold in F1 button. you should get to a microsoft windows (in Japanese) screen. it may be in there.
-
what revision software?
that looks like back around 7.7 or so
i do remember some kind of calibration back then, i will continue thinking about it. -
How do I find the webpage on this RH Controller?
JK
Funny, i think you will need flux capacitor, and a 300bps modem
-
try this
go to the robot web page
there is a search tp program function
search for pr[1
-
I do not know of a way to turn the user screen off but i have doet something like this.
if DI [ x]=off call message(1)
message.tp
jump lbl[AR[1]]
lbl[ 1]
message [make di [ x] happy]
wait DI[ x]=on
jump lbl[99]several other lbl's and messages in here
LBL[99]
message []
message []
message []
message []
message []
message []
message[the previous message has been cleared]
message[there is nothing to see here]end
-
chances are you do not really need all of your UI's you can get pns down to 1-3 from 8 depending on how many programs you need to call. edit I'm not gonna tell you how to circumvent safety but look look at how many UI's you have mapped vs how many are you actually using.
-
as this is a help topic...
with a real robot with ir vision (current 8.3) the gige option is always there included free with irvision even if you did got get gige cams from fanuc, but often not installed. just go to file software install and install the option using your original usb install software.
also always use internet explorer 32bit not 64bit,. if you are using win xp 64 or newer, you will have a 32 bit internet explorer under c:/win/system32 or some variation.
-
External Content www.youtube.comContent embedded from external sources will not be displayed without your consent.Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.
Well she is there but I am not.
you do see me at the end of the video
-
Simulate is only on inputs, and you can simulate them on or a value for testing
18 [Arc enable ] [****] * ***
and
18 [Wire stick alarm] [****] 8 ***
are not properly configured, you will need to assign i/o points to them.