Posts by Bulo

hello,
does anybody know a variable to know if the robot is inside a safe operation zone? They told me to use $sr_range[number] But doesn't exist...

thank you so much

p.s. Sorry for the title error but I can't modify it

Quote from SkyeFire

Works for me on 8.3.11.

o used that password with login 'kukauser' and worked! with 'administrator' doesn't work..

Can be resetted...do you need the solution in private?

Do You know the password for the new 8.3.8? 68kuka1secpw59 doesn't work anymore

Do You know the password for the new 8.3.8? 68kuka1secpw59 doesn't work anymore. ..

Doesn't backup to D:Backup ?

Or "WAIT FOR $T1 OR $ T2"

Try
$TOOL=NUMBER OF THE TOOL
LIN $POS_ACT : {x 0, y 0, z -100, a 0, b 0, c 0}

Hello guys,
i want to program my Kuka in offline at Home, is there any OfficeLite or SimPRO demo version to do it?
thank you so much!

Quote from mookie

cant believe i missed this one.

the KUKA can communicate to a keyence camera through ethernet. the older versions of keyence in my opinion were better suited for this because you could recieve notification for connect and disconnect signals to the camera. i believe that was the cv-5000 series. the newer cameras have an sdk but there is quite a bit of stuff missing.

the transmission of information to the camera is pretty straightforward. you send a value and it sends a value back. the transmission of an image on the other hand is another story.

I can probably answer any questions you have and i may be able to dig up a screen shot or two.

Display More

I know this topic is quite old but can you help me doing this? (Connecting Kuka KRC4 to Keyence by ethernet)
Have you got any examples?

thank you so much!

Hello,
Anybody can help me configuring or with some examples connecting a keyence vision system with Kuka kRc4?

I'm Working with Daimler standard on kuka kRc4, can some one send me this document ? My email is gooorox@gmail.com
Thank you so much!

Hello,
Is It possible to convert a Signal variable name to String in Kuka KRC2?
Thank you guys

Inviato dal mio GT-I9505 utilizzando Tapatalk

Hello Guys,
Can anybody help me configuring abb s4 profibus?
I haven't any manuals so I'd like to see any eio.cfg examples...I'm trying to configure d352b card with profibus slave, notthing special..

Thank you so much

Inviato dal mio GT-I9505 utilizzando Tapatalk

Plug the keyboard directly to the SmartPAD..

External PLC is faster then SPS..

Inviato da mio iPhone utilizzando Tapatalk

It's not the solution but it's a nice idea, good

Inviato da mio iPhone utilizzando Tapatalk

Need to change UALM message dinamically too! Does anybody know how to do it?

Sorry I didn't out [CR] at the end of the cwrite

Inviato dal mio HTC One utilizzando Tapatalk

Hello guys,
I nerd to send the string 'T1' by serial 232c Communications..i used carote with parameter '%c','T1' but the other side tells me that it isn't in ANSI coding
Can anyone help me?