Posts by h.esk60

but in my robot studio it doesn't open !

my version is 6.08

is it depemd of version of robot studio ?

Hi

Please instruct me for connect IRC5 with cp1616 profinet to siemens s7 -1200

My robot has this option 888-1 ProfiNet IO M/S and CP1616 card

RobotWare Version: 5.15.9157.15

Many thanks

you mean in Add-in robot studio ?

but I couldn't download robotware there

Many thanks

ok

Many thanks

but have above error i want to solve it

- How can I define the tool zone for this robot , please instruct me

thanks

Hi

Recently I am working with 6640 IRC5 robot

When I wanted to jog the robot or run the program ,I have STZ violation error

- How can I define the tool zone for this robot , please instruct me

- Can I disabled safemove function

Many thanks for your help

Yes

But it is not licenced the trial version

Can you send it robotware 5.16 for me

By email

Many thanks

Hi

I need robotware 5.14.1033.01

would you please instruct me

Many thanks

Hi

I purchase second hand fanuc rj3 model but it doesn't have any IO or the other network for use as communication with the other device

Would you please instruct me the order number of module for RJ3

IO digital

Profibus

Device net

Ethernet

Many thanks for your help

I ask from kuka but no reply .

if anyone can instruct me

hi

Dear my friends

need machine data for KR 150 2000-2 my controller is VKRC2 edition05 win95

I could find it in KRC source file .

Many thanks

I have marked the resolver before change

This is before motor on, while when system come up I have this error and the ENABLE lamp is off .

Hi

I have IRB2400L S4C.

at present I have error 38031 resolver error for irb_1,arg1:1

I have change the SMB board , change resolver with the other axis and check all cable but my problem not solve!\

Something confused me "When I remove the resolver axis 3 from the connector my error change for axis 3 and not show axis 1 error" !

Please instruct me

Many thanks

Dear My friends

Hi

I have 2400L s4C

The robot system come up .... but now ENABLE lamp is not on.

we have errors

what is the backplane 20207 ? what cause this problem

Many thanks for your help

Ok

What can I do now ?

I can send you my robot back up

How can make boot disk?

Dear My friend

Hi

Please find attach file(backinfo file) and let me know how can I have boot disk for this robot

I have complete back up of this robot

many thanks

>>SYSTEM_ID:

24-12254

>>PRODUCTS_ID:

3HAC2700-2/56 System Pack 3.2

TP Language

Irb 2400

Advanced Functions

>>ROBOT_TYPE:

2400L M98 Floor

Hi

I need boot disk for IRB 2400L M98 Floor THis is S4C controller

I have back up of robot but how can i cerate boot disk .

Many thanks

The options need for showing the basler camera in irvision and can VGR with robot
My mean pick& place

the robot find piece as simple by basler camera and irvision software

many thanks

Quote from HawkME

You need to make sure you have the correct software option and purchase the Basler camera. Or talk to Fanuc on purchasing the cxv system, or use a 3rd party system and comm protocol to send results.

Would you please let me know which options should be installed for useing basler gige camera and irvision

I want to use irvision with basler camera for VGR