and how do we configure the dse software? should we copy some file somewhere?
Posts by trunkcnc
-
-
Variables... base_data[1].z = 5 press enter
-
Hi Everybody, does anybody has the Arc20 manual in spanish???
Thanks Beforehand.
-
Is ur rdw3 or 2?
-
Hi all, does anybody has a 3d model for kuka kr350?
Thanks beforehand
-
Brilliant Massula. I havent tryed yet but it makes a lot of sense [emoji3] . Any way is weird that we can run ed05 soft in vkrc2 cabinets. Mfc2 is isa plugged board and ed05 is mfc3 pci. But i swear u that it works. [emoji28] ill post a picture. We deal with used kuka robots and rigth now we re conditioning these vkrc2. They re great machines
-
By the way our soft version is 5.4.7
-
We have tried also with usb pen drive. But no luck neither
-
Nope. With that file doesnt work. I know that it should but it doesnt
-
Hello, trunkcnc.For VKRC2 ed05 (this one that comes with XP), the procedure is the same, but instead a CD you will use a usb stick. And, if I recall correctly, the keyfiles folder for theese robots should have three files.
Enviado do meu GT-I9505
Hi massula. What are the others files for setting expert level we need? We have key_2.txt . Do we need any other file? -
Hi. I have tryed to get into expert level with a pen drive but it doesnt work. We only have one key file. We have tried with cd room but didnt work neither. The only cd file we have is called key_2.txt. what other file are we missing?
-
-
Massula we have vw soft in krc2 working. That is not problem. It works fine. The problem now is that we cannot opent expert level
-
Mines are vkrc 2002-2004 cabinets
-
Do u mean that xp can only be running with ed05 cabinets ????
-
Thanks massula but mines arent ed05 ?????
-
Hi. Does anybody knows how to set a vkrc2 xp controller into a expert level??????. I have a cd with soft key to do it with w95. But it dosent work with xp softs. Any suggestions? [emoji51]
-
What do you mean system program? Operating system?
-
Is ur soft xp or w95?
-
Correct vvelikov. But im interested in feeding the programs lines continously from an external computer. I have seen that in a marble milling cell