And no opintions 🙄
Posts by the leg
-
-
I know that..
I have updated the celeron cpu with PIII tualatin 1.4ghz & 1.5gb ram
I have installed in ssd (ata to sata adapter) win xp emdebed sp1 with kss 5.4.7 and works
but this is kss 5.4.7 not kss ed05.
I ask for ed05.
ED05 Is the PC hardware not the software
-
Windows XP may need an upgrade to support KSS5.x
Yes you will need the correct version of XP and the security updates etc
-
As long as your PC is a celeron 400 you can install V5 software but you need 128Meg of ram min
Nothing else is needed
-
Has anyone tried a Non Kuka SSD Drive in a Robot running V8.3
We have a client looking to have spare Hard drives but £500 each seems a bit excessive.I have used None Kuka Drives in the controllers before but not tried a KRC4 .Anyone have experience of this please
-
I still would have any waits inside the SPS IMHO Also depends if he has anything in sps
-
Loulli The waits you have inside the SPS is a very bad idea and not the correct way to do that IMHO
Something like this would be better
Edge= ($date.sec-($date.sec/2)*2==0)
IF AUTO_START_PRESSED AND $EXT AND $ALARM_STOP AND EDGE AND NOT $PRO_ACT THEN
PULSE(DRIVES_ON,NOT $PERI_RDY,0.2)
PULSE(CONF_MESS,$STOPMESS AND $PERI_RDY,0.2)
PULSE(EXT_START,$ON_PATH AND NOT $PRO_ACT AND $STOPMESS,0.2)
ELSE
DRIVES_ON=FALSE
CONF_MESS=FALSE
EXT_START=FALSE
ENDIF
-
unplug the profinet cable and use startup mode
-
Sounds about right i had to change one once with no dongle . Back it up and give it go
-
Think it was turned off on later versions of 8.3
As it's shockingly slow to use v8.5 this has been fixed I believe
-
A one line function like Moveoffs in ABB 👍
-
i had this and it the motor cable . Someone had drilled through it lol
It would work ok at 1% speed though
-
Have you reset the RWD setting to default ? or exchanged the RDW ?
-
IF $T2 OR $AUT THEN
PULSE ($OUT[16],TRUE,0.5)
ENDIF
-
only replace what you drain out !
-
A customer sent me a KCP2 that had a problem with the LCD, I changed the LCD and need to test the KCP2, but I do not have the KRC2 cabinet.Is there any way to power the KCP2 without the cabinet
I have a KRC2 Test rig for sale if your interested. It allows for testing of all parts including motors in small compact mobile unit ( its on wheels )
It comes complete with ED05 PC 6 axis drives 6 motors , KCP,RDW and is fully working
-
Have you tried a cold start on the controller or a reboot .
If you cannot select cold start just pull the power on the PC without turning the the Controller off, That way you shouldn't lose the mastering
-
Funnily enough i used this the other week to image some none ed05 krc2s
I simple used my USB to IDE Cable and the KUKA stick and selected image external drive and it was super fast due to the USB 3
-
true but my response was not to OP. and if someone chooses not to share system info, i will choose to assume platform...??
-
OP is using KRC2 ?