hello, there is a problem with the robot, the fuse on the transformer blew out, it was replaced, but after the software stopped working, this menu appeared.what to do, help me urgently.
Posts by ANRB
-
-
Can someone help me download the Hacked Roboguide.
Maybe there is a link to some source, please help
-
Yes, it was, but it has already been fixed, but the synchronization still does not work
-
Hello, I'm trying to set up the encoder to synchronize with the conveyor, but the robot does not change the position of the points, the conveyor moved half a meter, but it still draws in one place
-
Hello, have you found out what kind of mistake this is and how to avoid it
-
Hello, have you found out what kind of mistake this is and how to avoid it
-
Hello, share the errors that you know for fanuc robots and how to fix them, and if you don't know how to fix them, send them too, I think everyone can use this information later in the future
-
Hello, tell me, I'm trying to make trajectories with an encoder and such an error came out, what should I do?
-
Good day to all, can anyone share how your flushing, maintenance and paint filling programs work for the fanuk painting robot, I just don't know what position the robot should be in at the time of executing these programs and how it should switch to these programs, it should also have some kind of trajectory by which he goes to them
-
Thanks, I've already turned it on, but I can't synchronize the speed of the robot with the speed of the conveyor, the robot moves the same way when the conveyor is turned on and off.
How can I solve this problem, this is my first time working with encoder
-
Fanuc p-40ia robot
Fanuc r-30ib mate plus controller
For painting
-
Good afternoon, tell me how to solve this problem.
LNTK-026 encoder not enablet -
I have a level shifter that is connected to a common controller, the ENCODER is on the shaft, it turns at the time of starting the line, but I do not receive signals
-
Good afternoon, please help me with setting up the incoder
-
There is nothing for DI from line 33, how can this be fixed?
Advertising from our partners
