thank you for your reply
Woah... careful there. did you read documentation and pitfalls mentioned in READ FIRST?
i hope you have created backup image of the robot HDD before touching this, because if anything goes wrong, that will be your way out of trouble.
post your KLIconfig and state KSS version. if this is at least KSS8.3, you can also use KSI port to connect to robot. KSI port works as DHCP server so your computer would get IP address from the robot and you do NOT want to connect this to your network.
i changed the ip-adress on the pc, i've read that it should match the ip-adress from the robot (except from the last part), as well as the subnet-mask and standard-gateway. yes i have made a backup.
ok. If it helps, via WorkVisual i am able to connect with the ksi-port.
I think the state kss-version ist 8.5.8
KLIConfig: