Here you go. Version 3.07.
Granted I have never used this. You will likely have to run this in a virtual machine, or in DOSbox to get it to run in on modern os.
I opened a virtual machine and installed Windows 7 in it. but when running v307 I get invalid error. How can I run this pack? Will I integrate it with roboguide or does it have a different way of working?
Here you go. Version 3.07.
Granted I have never used this. You will likely have to run this in a virtual machine, or in DOSbox to get it to run in on modern os.
I will try version 3. I hope I will succeed. thank you in advance for everything
What version of OS is your robot running? I have translators dating back to v1.5.
robot model :S420f-ht
core name :std system core
core ıd : v3.07pe
When I try to upload the .tp file I created in the roboguide simulation to my r-j panel, I get the following error. I do the transfer via kfloopy.
LANG-006 WARN Invalid or corrupted TP file
Cause: A when loading .TP file, invalid data was found. This may occur if a .TP file has become
corrupted or if some other type of file e.g., a .PE file, has been copied or renamed to a .TP file.
Remedy: Generate (using SAVE, with $ASCII_SAVE = FALSE) and load a valid .TP file. Note: An
existing TP program in the controller might have been corrupted as a result of your attempt to load the
invalid file. You might have to reteach the teach pendant program, before you save it as a .TP file.
Compile the source code with version 3
Can you guide me on how to do this?
I have a fanuc s420f robot and r-j panel. For this, I code the program in Karel languages. But while converting this karel file to .pc format, it builds with ktrans v9 version. When I transfer the file we created with this version to the r-j panel, I get the 'version too old' error. what should I do for this.
The roboguide simulation program I use does not have r-j panel support.
How can I downgrade the ktrans version? Or how can I transfer the file to the r-j panel?
I have a fanuc s420f robot and r-j panel. For this, I code the program in Karel languages. But while converting this karel file to .pc format, it builds with ktrans v9 version. When I transfer the file we created with this version to the r-j panel, I get the 'version too old' error. what should I do for this.
The roboguide simulation program I use does not have r-j panel support.
How can I downgrade the ktrans version? Or how can I transfer the file to the r-j panel?
we have the fanuc s420f robot and r-j control panel . we want to change control panel with r-j2.
what kind of problems we will meet. do we have adjustment problems.
