Thank you, I was able to solve it.
Posts by JairoAR
-
-
Is it correct to format the CF in fat 16, fat32, nfts format? I guess the correct one is fat16.
-
My robot does not get past the MOTOMAN startup image. I wish I could send images or the document of everything that has happened to me =(
-
I bought a 128MB memory, I recorded the program for the NX100 controller provided by YASKAWA, but it is as if the teach pendant does not read the memory... Any recommendation?
-
Will a 32 GB CF memory stick work in an NX100 controller?
-
Thank you for your reply.
I am in Ecuador, I wrote to Yakawa Brazil, Yaskawa USA and Yaskawa Canada, no one has given me an answer =(
The firmware that is in the compact flash I could only get it from the manufacturer I guess, I hope they answer me.
-
I have a similar problem, did you manage to solve it?
I tried to enter maintenance mode but the screen just stays in degraded blue, it doesn't show any options.
And out of maintenance mode, after a while it turns off and the hold button turns on.
-
The E alarm appears on the 7-segment display, not on the teach pendant.
I also had the low battery alarm on the 7-segment display, I replaced the battery with a new one of the same value, but I don't know how long the robot was stopped.
As I mentioned before the teach pendant turns on but then the display turns off and the hold button turns on.
And in maintenance mode the screen remains in blue degraded but without any option, ie you can not do anything.
-
In "NF01" the alarm is "E".
According to the manual it may be the cable but I checked it pin by pin and it is ok.
What does the compact memory contain?
I would like to attach the pictures but for some reason I cannot.
-
Hello, I am new to the forum.
I recently received a used motoman ES200N - NX100 robot.
When I turn it on I get the following alarms shown in the picture.
The teach pendant starts normally after a moment the screen turns off and the hold button light comes on.
I have put it in maintenance mode and no option appears, just the background screen.
Any suggestions?