Thank you very much, you are really fast.
But my question is about this list, what do you think is the order of the list?
Should I start calibrating the vision or redo the frames or try everything and see what doesn't work and change it?
Thank you very much, you are really fast.
But my question is about this list, what do you think is the order of the list?
Should I start calibrating the vision or redo the frames or try everything and see what doesn't work and change it?
Yes! All is the same.
Sorry, my English is not very good.
We have 3 cells. We are finishing the first one and I have the backup.
Now we have to load the backup in the new one. I have the master fill of the new robot and I know how to load the backup, but then, I have to make adjustments, like calibrating the visions system, adjusting the frames etc etc.
I would like to know if you can recommend steps to do all this in order.
Thanks!
Hi Guys!
I have to restore a backup in a new cell.
I would like to know what steps I have to follow.
For example
1- Calibrate the tool
2- Redo the frames
3- Calibrate Vision
4- Reposition objectives
We don't have much time and I wouldn't want to remake things because I did it in the wrong order.
Thank you!!!
Hello Guys!
I want to do an app that pick pieces in a conveyor.
The position of pieces is going to be send by a external vision system.
I want to know how I can attach a new workobj in the conveyor tracking when for example the vision raising a signal.
I was reading conveyor tracking manual, and I don't understand the signals and how to use.
thank you!!
The easier form is moving a frame.
You can add an offset to all movements and modify that offset.