Posts by dominik0613

You have to change the vendor id in the system variables $AWEPRR—>$VENDOR_ID=108

Hi guys!

I have a issue with arc start instruction. I want to start a plasma cutter with it. I send a start signal to the plasma cutter and receive an arc detect signal back. I also set these two signals in Weld I/O.

So my problem is that I added the arc start instruction to my first point in the program, the plasma builds up, I get the arc detect signal from the plasma cutter, but within a few seconds, for some reason, it automatically takes back the plasma start signal and I get an arc lost error, which is understandable because for some reason the plasma start signal appears.

Anyone have any ideas?

?

Hello

I would have a problem with using a Cad to path mod to generate a TP program in which the robot and an external positioner move at the same time, the program is created, the robot moves nicely but the positioner does not move, could you help me, what could be wrong?

Thanks for the help