This is how we have done it through the plc program the input of the light curtain being broken in the plc you assign to a fanuc digital output your going to need to use a calculator for Hexadecimal ex 8a=138 so when you look at your digital out puts on the pendant D/O 138 would trigger on and off while being broken
Posts by Trav_1992
-
-
-
You need to open up the vision pick boundaries
-
Also make sure to config 7 ui signals true
-
Yes don’t hold shift!
-
Did you figure out your issue I am working on a palletizer and randomly we are getting stuck on tk2pp as we are placing boxes on a pallet