Posts by RyanRobot

Delete the job files in recycle bin.

Do the following:

1.) Remove connector CN10 on the

WRCA01 circuit board and re-insert it

2.) Remove the terminal connector of

CN10 on the WRCA01 circuit board

and re-insert it.

3.) Remove connector CN05 on the

XCP01 circuit board and re-insert it

4.) Is the LED on the

WRCA01 circuit board lit?

5.) Remove connector CN50 on WRCA

circuit board and re-insert it.

6.) Remove connector 2CN on the

RCP01AAA unit and re-insert it

7.) Check the fuse for the

RCP01AAA unit

8.) Remove the connector 1CN on the

RCP01AAA unit and re-insert it

Good Day

Here is the link for stp file

Linear Track TSL - Yaskawa

Linear Axis TSL YASKAWA MOTOMAN for robotic cells.

www.roboplan.pt

Then replacement is necesarry

Hi. This alarm is

F-SAFE

ENCODER COMM.

ERR 1

How to resolve:

EAXA21 board failure" occurred simultaneously with

this alarm,

Replace the fuse(F1) in the EAXA21 board

1) Turn the power OFF then back ON.

(2) If the alarm occurs again, check the connection and insertion

of the following cables and connectors.

[Robot axis]

·Cable between encoders

·EAXA21-CN508

·YSF25-CNBX

[External axis]

·Cable between encoders

·EAXB21-CN534,535,536,540,541,542

·YSF25-CNBX

Backup cmos.bin and replace YSF25 board

I only have following files: SOK-1DIM.JBI,SOK-2DIM.JBI,SS-1DIM.JBI,SS-2DIM.JBI

Good day

I have touch sense and comarciii on nx100 sytem. I have found a manual online and there are touch sense jbi files . Where can i get those files. Thank you