Also for added info...
I was able to backup all files and image of 3 M20 robots.
The issues I am having with image backup are on LR Mate robots.
Also for added info...
I was able to backup all files and image of 3 M20 robots.
The issues I am having with image backup are on LR Mate robots.
Do those files still exist on your flash drive after it fails?
And so you're trying both an 'All the Above' backup with 50-60 files which fails and also an image backup with fails too?
Yes the files still exist on my flash drive. I have multiple image backups where it is getting 3/127 or 6/127 files backed up.
I have tried both All of the Above backup and IMAGE Backup. I am able to completely backup over 100 files for AotA, so there is no issue there. My Image backup is failing still. This time getting 8/127 files backed up before failing.
Is there an alternative port you can try? Some have a port on the pendant and on the controller.. assuming you're using usb.
To be honest I doubt its backing up the 1st 10 files if its failing and leaving nothing behind. Sounds like it doesn't know the storage is there.
Sorry I may have been a bit unclear.
It is backing up a portion of the files. For example my last backup only saved the first 6 files then failed. I tried again today and it failed at 3 files.
This was happening on some other robots I was backing up as well. The backup would make it to around 50 or 60 files, and the next time I would try to backup it would get them all.
For some added info the robots that the image backups are failing on are LR Mates and the robots that I was able to backup are M20s. All controllers are all the same R 30IB.
I am having trouble with an image backup. I start the image backup by cycling power, and the backup starts. Then within the first 10 backup files, the backup fails and no image is backed up.
I have tried it with empty flash drives and part full ones. I was able to backup 3 robots before this one.